Kevin0010 Geschrieben March 23, 2015 at 00:27 Share Geschrieben March 23, 2015 at 00:27 I am doing a project about wheel drive robot, I used WIFI extension and the stack was supplied by step down power supply. last week and it worked very well but when i used it yesterday it failed the problem is : 1. when i put the wifi brick on the master brick and connected it to laptop with USB, the master brick cannot be recognized by brick viewer. 2.when i put one DC brick on the master brick, master brick and DC brick were shown on the brick viewer but when I put two DC bricks on the master brick only the mater brick was recognized. It seems to be the problem of supply current but it worked well before until yesterday. Is anybody who knows the reason of this problem, that will be much appreciated. and any discuss about wheel driven robot is welcome. Thanks. Zitieren Link zu diesem Kommentar Share on other sites More sharing options...
remotecontrol Geschrieben March 23, 2015 at 14:10 Share Geschrieben March 23, 2015 at 14:10 All bricks work if they are connected independently (not in a stack)? Which firmware versions have the bricks? WIFI is on top of the Master brick? Zitieren Link zu diesem Kommentar Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.