xsherlock Geschrieben April 13, 2015 at 21:01 Share Geschrieben April 13, 2015 at 21:01 how do I make red brick forget one of the wifi networks. I made an additional wifi net for sensors and moved all the masterbricks with wifi to it with no problem. But the redbrick that controls them keeps getting back to the old networks. How do I wipe clean the wifi setup so it only connects to the right one. Maciej Zitieren Link zu diesem Kommentar Share on other sites More sharing options...
photron Geschrieben April 14, 2015 at 08:41 Share Geschrieben April 14, 2015 at 08:41 Go to the RED Brick Network Settings tab in Brick Viewer. Click the Scan button to get an up-to-date list of WIFI networks. This should clear any chached information on the RED Brick. Pick the one you want, enter its key and click the Connect button. Zitieren Link zu diesem Kommentar Share on other sites More sharing options...
xsherlock Geschrieben April 17, 2015 at 12:22 Autor Share Geschrieben April 17, 2015 at 12:22 I did pressed scan numerous times. IF both AP's had the same password, the brick would sometimes connect to the other AP after reboot. I had to resort to changing the password to the sensor AP so the brick connects uniquely to it. Zitieren Link zu diesem Kommentar Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.