2019-09-05: 2.0.0 Beta 1
- Initial version

2019-09-10: 2.0.0 Beta 2
- Add support for:
    - Analog In Bricklet
    - Analog In 2.0 Bricklet
    - Industrial Digital In 4 Bricklet
    - Industrial Digital Out 4 Bricklet
    - Joystick 2.0 Bricklet
- Model Humidity 2.0 and Temperature 2.0 Heater as channel

2019-09-12: 2.0.0 Beta 3
- Add support for:
    - GPS Bricklet
    - GPS 2.0 Bricklet
    - LED Strip Bricklet
    - LED Strip 2.0 Bricklet
- Fix Real Time Clock millisecond to nanosecond conversion

2019-09-13: 2.0.0 Beta 4
- Add support for:
    - HAT Brick
    - HAT Zero Brick
    - CO2 Bricklet
    - Color Bricklet
    - Dust Detector Bricklet
    - Hall Effect Bricklet
    - Joystick Bricklet
    - Linear Poti Bricklet
    - Linear Poti 2.0 Bricklet
    - Moisture Bricklet
    - Segment Display 4x7 Bricklet
    - Segment Display 4x7 2.0 Bricklet
    - Tilt Bricklet
- Show firmware version of discovered devices

2019-09-16: 2.0.0 Beta 5
- Add support for:
    - Accelerometer Bricklet
    - Accelerometer 2.0 Bricklet
    - Industrial Dual 0-20mA Bricklet
    - Industrial Dual 0-20mA Bricklet 2.0
    - Thermocouple Bricklet
    - Thermocouple 2.0 Bricklet
- Fix naming inconsistencies
- Fix channel reconfiguration logic

2019-09-17: 2.0.0 Beta 6
- Add support for:
    - Analog Out Bricklet
    - Analog Out 2.0 Bricklet
    - Analog Out 3.0 Bricklet
    - Current12 Bricklet
    - Current25 Bricklet
    - Laser Range Finder Bricklet
    - Laser Range Finder 2.0 Bricklet
    - Line Bricklet
    - Motorized Linear Poti Bricklet
- Keep channel configuration when en/disabling channels
- Fix description of non-moving averages

2019-09-20: 2.0.0 Beta 7
- Add support for:
    - CO2 2.0 Bricklet
    - Dual Button 2.0 Bricklet
    - Hall Effect 2.0 Bricklet
    - Industrial Analog Out Bricklet
    - Industrial Counter Bricklet
    - Industrial Digital Out 4 2.0 Bricklet
    - Isolator Bricklet
    - RGB LED Bricklet
    - RGB LED 2.0 Bricklet
    - Rotary Encoder 2.0 Bricklet
    - Rotary Poti Bricklet
    - Thermal Imaging Bricklet
    - Voltage Bricklet
- Always show air pressure in bar.

2019-09-23: 2.0.0 Beta 8
- Recreate all channels when reconfiguring

2019-09-24: 2.0.0 Beta 9
- Add support for:
    - Outdoor Weather Bricklet

2019-09-25: 2.0.0 Beta 10
- Add support for:
    - RGB LED Matrix Bricklet
    - IMU Brick
    - IMU 2.0 Brick
- Fix trigger channel building

2019-09-27: 2.0.0 Beta 11
- Add Backlight channel for LCD 128x64 Bricklet
- Allow all Number types (Decimal, Quantity and PercentType) for Channels accepting one of them

2019-10-25: 2.0.0 Beta 12
- Add custom heartbeat mechanism
- Fix initial values of IO16 input pins

2019-11-06: 2.0.0 Beta 13
- Add support for:
    - DC Brick
    - Master Brick
    - RED Brick
    - Servo Brick
    - Silent Stepper Brick
    - Stepper Brick
    - DMX Bricklet
    - E-Paper 296x128 Bricklet
    - One Wire Bricklet
    - Piezo Buzzer Bricklet
    - Piezo Speaker Bricklet
    - Piezo Speaker 2.0 Bricklet
- Complete support for:
    - IO4 2.0 Bricklet
    - LCD 16x2 Bricklet
    - LCD 20x4 Bricklet
    - LCD 128x64 Bricklet
    - OLED 64x48 Bricklet
    - OLED 128x64 Bricklet
    - OLED 128x64 2.0 Bricklet
- Fix heartbeat/reconnect logging
- Add actions to all supported devices
- Fix initial moisture channel value of Moisture Bricklets
- Model Dual Button Bricklet LEDs as channels

2019-12-19: 2.0.0 Beta 14
- Add support for:
    - Remote Switch Bricklet
    - Remote Switch 2.0 Bricklet
    - XMC1400 Breakout Bricklet
- Add missing labels to channels
- Use correct character set for displays
- Allow configuration of status LED and SPI baudrates
- Add more color palettes to Thermal Imaging Bricklet
- Use unused and remove unnecessary configuration parameters
- Set defaults for run-time generated channels
- Prefix action and channel type names with device category and name
- Fix Outdoor Weather Bricklet reset behaviour
- Mark configuration as advanced if API is flagged so
- Show a warning if a device's firmware is too old


2020-01-22: 2.0.0 Beta 15
- Prefix thing type names with device category
- Fix LCD 20x4 backlight channel
- Fix bridge linkage
- Rework Outdoor Weather Bricklet support
- Remove duplicated category prefixes
- Rework firmware update notifications

2020-01-23: 2.0.0 Beta 16
- Fix Outdoor Weather Bricklet reboot behaviour
- Remove Bridge ID from Thing UIDs

2020-01-31: 2.0.0 Beta 17
- Reinitialize devices in case they could be uninitialized and came back online
- Rework Remote Switch Bricklet (2.0) support
- Don't refresh trigger channels when initializing
- Use new java type scheme
- Set minimal required firmware version based on feature use

2020-02-10: 2.0.0 Beta 18
- Schedule updates for channels without callback
- Add scaling for thermal images
- Fix some reinitialization/dispose bugs
- Fix log messages
- Add firmware update support for standard (legacy) and CoMCU Bricklets
- Change Multi Touch Bricklet electrodes back to stateful channels

2020-02-28: 2.0.0 Beta 19
- Add support for:
    - CAN Bricklet
    - CAN 2.0 Bricklet
    - NFC RFID Bricklet
    - NFC Bricklet
    - RS232 Bricklet
    - RS232 2.0 Bricklet
    - RS485 Bricklet (RS485 and Modbus Master for now)
- Fix logger name of TinkerforgeConfigDescriptionProvider
- Use legacy java type scheme
- Allow flashing if device is offline but reachable
- Add missing channel labels and descriptions
- Add more actions

2020-03-02: 2.0.0 Beta 20
- Fix choice options
- Improve error messages and timeout handling
- Fix order of discovery and removal of old discovery results
- Fix IO-16 edge counter
- Fix race condition in reachability check

2020-04-08: 2.0.0 Beta 21
- Compile against Java bindings
- Add online documentation
- Add more meta information to channels and parameters
- Use DecimalType if no unit is used
- Fix discovery clean up if more than one Brick Daemon is used
- Let RS485 actions return empty map instead of null on request errors
- Fix LED Strip channels
- Fix HAT Brick sleep command and label
- Add missing channels and actions:
    - Master Brick USB voltage channel
    - Analog value channel for old Bricklets
    - Compass Bricklet magnetic flux density channel
    - Multi Touch 2.0 Bricklet touch LED configuration
    - PTC resistance channels
    - Segment Display 2.0 Bricklet set numeric value action
- Remove get bootloader mode action

2020-04-29: 2.0.0 Beta 22
- Fix channel reconfiguration logic
- Fix Master Brick required firmware version
- Fix LED strip index parsing

2020-05-19: 2.0.0 Beta 23
- Add control channels to DC Brick
- Add All LEDs channel to LED Strip Bricklets
