Jump to content

RED Brick Image 1.10 Test


photron

Recommended Posts

We're working for a while now on a big software update for the RED Brick. This includes Kernel 4.12 and Debian 9.

 

This means:

 

  • Support for more WIFI USB sticks
  • Support for Access Point Mode for more WIFI USB sticks
  • Support for Bluetooth LE/4
  • Updated software: Node.js 8, Nagios 4, Octave 4, ...
  • And mode

But there are still some open problems:

 

  • Currently no 3D/OpenGL hardware acceleration

Today, we provide the first test version of the new image, along with a new Brick Viewer version. We're looking forward to your feedback.

 

http://download.tinkerforge.com/red_110alpha1/

Link zu diesem Kommentar
Share on other sites

  • 1 month later...

Okay, here's Alpha 2 including the following changes:

 

  • All network management is now done by Network Manager. this reduces the waiting times in Brick Viewer while configuring the network. The only thing that's not working yet is connecting to hidden WIFI networks
  • OpenHAB updated to version 2
  • Image size not too close to 8GB boundary anymore

http://download.tinkerforge.com/red_110alpha2/

 

Edit: The image is now uploaded.

Link zu diesem Kommentar
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 4 weeks later...
  • 2 months later...

Hi,

this was recently discussed on the german board as well. Please let me try to  translate borgs statement from there:

we discussed the topic and checked the test we ran.

 

There are two findings:

 

1. The 1.10 image uses the Linux CPU frequency scaling governor. This means the CPU frequency is managed according to the load. Low frequency on low load and vice versa. This results in a lower system temperature and power consumption. But it also makes it look like the CPU resource consumption percentage is increased.

 

2. With image 1.10 we moved to the most recent Linux Mainline Kernel. Unfortunately, the SPI driver works very inefficient in our usage scenario. As far as we understand it the reason for this is, that drivers are optimized for multi processor systems, wich the RED brick is not. We already tried to improve the driver, you can find our modifications here: https://github.com/Tinkerforge/red-brick-linux/commit/2082ee9458d1bd553fb2c1b933162b3beabc8332

 

Anyhow, if you compare image 1.9 with 1.10 a performance decrease is measurable. We're working on improvements. Yet, this is a very time consuming topic.

Link zu diesem Kommentar
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Gast
Reply to this topic...

×   Du hast formatierten Text eingefügt.   Formatierung jetzt entfernen

  Only 75 emoji are allowed.

×   Dein Link wurde automatisch eingebettet.   Einbetten rückgängig machen und als Link darstellen

×   Dein vorheriger Inhalt wurde wiederhergestellt.   Clear editor

×   Du kannst Bilder nicht direkt einfügen. Lade Bilder hoch oder lade sie von einer URL.

×
×
  • Neu erstellen...