Jump to content

Laser Ranger Finder - Jumpy Reading?


robheathcock

Recommended Posts

Hello

 

I am using 3 x Laser Range Finders in a garage turntable application.  This is to estimate the distance of a vehicle from 3 x walls, if the vehicle is between certain distances the turn table is allowed to moved.

 

The problem I am seeing is that when the table is empty the readings are steady, although they can bounce up to 50cm in a matter of seconds (wall are white textured cement).  However when a vehicle is put on the turn table the readings are all over the show.  They will rapidly change from 1cm to 300cm (distance is approx 300cm from the sensor).  The problem is it changes so quickly it is not reliable (don't want to put a Roller into the wall). 

 

Is this sensor not suitable for painted metallic surfaces? 

 

Does anyone have any experience with this sensor?

 

Thanks in advance

 

Rob

Link zu diesem Kommentar
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Gast
Reply to this topic...

×   Du hast formatierten Text eingefügt.   Formatierung jetzt entfernen

  Only 75 emoji are allowed.

×   Dein Link wurde automatisch eingebettet.   Einbetten rückgängig machen und als Link darstellen

×   Dein vorheriger Inhalt wurde wiederhergestellt.   Clear editor

×   Du kannst Bilder nicht direkt einfügen. Lade Bilder hoch oder lade sie von einer URL.

×
×
  • Neu erstellen...