Jump to content

Issues Raspberry Pi & RED Brick


rwblinn

Recommended Posts

Encountered some issues when connecting the RED-Brick (RED) to a Raspberry Pi (RPi) 3B+ running latest OS Strech.

 

Raspberry Pi: Installed brickd 2.3.1 and brickv 2.3.15.

RED: Installed RED image 1.12.

 

Connected the RED to the RPi via USB, started Brick Viewer (Menu Programming > Brick Viewer; Note location changed from Menu Other).

 

Brick Viewer selected Updates/Flashing:

Receiving error message: latest version information on tinkerforge.com is not available (error code 1).

The Brick Viewer lists Brick Viewer Installed 2.3.15, RED Brick 2.0.3.

 

Brick Viewer:

Connecting to RED receiving message: Image version 1.12 (full) is not officially supported yet. Please update Brick viewer.

Pressed Access the RED, the Brick Viewer indicates Image Version 1.12 (full).

 

Brick Viewer Tab RED Brick:

Connecting the RED to the WiFi network with static address, pinging the RED first time (via terminal) states host unreachable.

Pressing Connect via the Brick Viewer Tab RED brick Tab Settings > Network > Configuration, the RED is reachable via ping.

 

Link zu diesem Kommentar
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Gast
Reply to this topic...

×   Du hast formatierten Text eingefügt.   Formatierung jetzt entfernen

  Only 75 emoji are allowed.

×   Dein Link wurde automatisch eingebettet.   Einbetten rückgängig machen und als Link darstellen

×   Dein vorheriger Inhalt wurde wiederhergestellt.   Clear editor

×   Du kannst Bilder nicht direkt einfügen. Lade Bilder hoch oder lade sie von einer URL.

×
×
  • Neu erstellen...