Author Topic: WiFi2 Green & Blue Status LED en-/disable?  (Read 590 times)

rwblinn

  • Jr. Member
  • **
  • Posts: 90
    • View Profile
WiFi2 Green & Blue Status LED en-/disable?
« on: December 07, 2018, 16:52:02 »
Hi,

how to turn on/off the Master Brick WiFi2 Extension Green & Blue Status LED using Python?

Background:
Want to turn all LED's on/off for a Master Brick 2.0 with WiFi2 Extension.

Tests Python:
Master Brick Blue LED disabled: master.disable_status_led()
OK
Master Brick Blue LED enabled: master.enable_status_led()
OK

WiFi2 Green LED disabled: master.disable_wifi2_status_led()
OK
WiFi2 Green LED disabled: master.enable_wifi2_status_led()
OK - It took ~2 minutes till the LED was turned on

WiFi2 Blue LED disabled: how to using Python?
WiFi2 Blue LED enabled: how to user Python?

Thanks
« Last Edit: December 07, 2018, 17:56:49 by rwblinn »

borg

  • Tinkerforge Staff
  • Administrator
  • Hero Member
  • *****
  • Posts: 3.119
    • View Profile
Re: WiFi2 Green & Blue Status LED en-/disable?
« Reply #1 on: December 10, 2018, 16:01:25 »
Unfortunately the blue LED of the WIFI Extension 2.0 is directly connected to the 3.3V rail and can not be controlled through software.
Wir sind die Borg, Widerstand ist Spannung durch Stromstärke!

rwblinn

  • Jr. Member
  • **
  • Posts: 90
    • View Profile
Re: WiFi2 Green & Blue Status LED en-/disable?
« Reply #2 on: December 12, 2018, 15:44:06 »
Thanks for clarification.

Might be a consideration for next version of the WiFi2 to be consistent with the other LEDs.