Jump to content

Continuous Servo control Python


Recommended Posts

Hi,

Im building a robot and want to write a programm so it can drive. Since I'm really unexperienced with programming I'm asking for some help. I have two continuous Servomotors and want to make them work. I've taken this as an example:

 

#!/usr/bin/env python

# -*- coding: utf-8 -*-

 

HOST = "localhost"

PORT = 4223

UID = "XXYYZZ" # Change XXYYZZ to the UID of your Servo Brick

 

from tinkerforge.ip_connection import IPConnection

from tinkerforge.brick_servo import BrickServo

 

# Use position reached callback to swing back and forth

def cb_position_reached(servo_num, position):

    if position == 9000:

        print('Position: 90°, going to -90°')

        servo.set_position(servo_num, -9000)

    elif position == -9000:

        print('Position: -90°, going to 90°')

        servo.set_position(servo_num, 9000)

    else:

        print('Error') # Can only happen if another program sets position

 

if __name__ == "__main__":

    ipcon = IPConnection() # Create IP connection

    servo = BrickServo(UID, ipcon) # Create device object

 

    ipcon.connect(HOST, PORT) # Connect to brickd

    # Don't use device before ipcon is connected

 

    # Register position reached callback to function cb_position_reached

    servo.register_callback(servo.CALLBACK_POSITION_REACHED, cb_position_reached)

 

    # Enable position reached callback

    servo.enable_position_reached_callback()

 

    # Set velocity to 100°/s. This has to be smaller or equal to the

    # maximum velocity of the servo you are using, otherwise the position

    # reached callback will be called too early

    servo.set_velocity(0, 10000)

    servo.set_position(0, 9000)

    servo.enable(0)

 

    raw_input("Press key to exit\n") # Use input() in Python 3

    servo.disable(0)

    ipcon.disconnect()

 

I don't know what to type in for ipconnection and i don't think I need the position stuff. I only want it to accelerate and slow down again. How can I do that?

 

Link zu diesem Kommentar
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Gast
Reply to this topic...

×   Du hast formatierten Text eingefügt.   Formatierung jetzt entfernen

  Only 75 emoji are allowed.

×   Dein Link wurde automatisch eingebettet.   Einbetten rückgängig machen und als Link darstellen

×   Dein vorheriger Inhalt wurde wiederhergestellt.   Clear editor

×   Du kannst Bilder nicht direkt einfügen. Lade Bilder hoch oder lade sie von einer URL.

×
×
  • Neu erstellen...