Hallo liebe Bastlerfreunde,
ich hab da mal eine kleine Frage an euch, und zwar:
Wie macht man das, das das da geht?
Also: folgendes Szenario: Ich will meine Bricklets (siehe unten) mit ihrem Masterbrick an den Raspberry Pi dranhängen und laufen lassen, vorerst über die IOT.remote.com - Seite meine Funksteckdosen schalten und dann später mit Python die Dinger ansteuern. Jetzt probiere ich schon 4 Tage rum und es klappt nur halb.
Test1: alles am PC: Brickviewer findet den Stack und alles funktioniert, auch IOT-Remote.com.
Test2: alles am Raspi: Brickviewer auf Raspi funktioniert, Brickviewer auf PC funktioniert, alle Schaltaktionen ok. IOT-Remote.com meldet auf Raspi : Error: Could not find any Remote Switch Bricklets at localhost:4223
Ähnlicher Fehler auf PC:
Error: Could not connect to 192.168.178.23:4223 (Error: 13)
Es ist wahrscheinlich nur eine winzige Einstellung am Raspi, die ich übersehen hab, oder?
Danke im Voraus für eure Denkanstöße!
-Alex-
Hardware:
Masterbrick 2.0, FW 2.2.1
IO-16 Bricklet FW 2.0.5
Ind.Quad Relay Bricklet FW 2.0.0
Ind. Digital In 4 Bricklet FW 2.0.1
Remote Switch Bricklet FW 2.0.1
PC mit Win7, 8GB...den üblichen Kram...
Raspberry Pi mit Raspbian
Software:
Brickviewer 2.1.0 (PC + Raspi)
www.iot-remote.com