Jump to content
jan

USB-Modem am RED "ERROR: Failed to initialze modem"

Recommended Posts

Was trage ich nun bei den Arguments ein? /dev/ttyUSB1

Habe "alles" ausprobiert: /dev/ttyUSB0, /dev/ttyUSB1, /dev/ttyUSB2, /dev/ttyUSB3.

Immer der selbe Fehler.

Modem wird aber mit  lsusb -v erkannt.

 

tf@red-brick:~$ find /sys/bus/usb/devices/usb*/ -name dev
/sys/bus/usb/devices/usb1/dev
/sys/bus/usb/devices/usb2/2-1/2-1:1.2/ttyUSB2/tty/ttyUSB2/dev
/sys/bus/usb/devices/usb2/2-1/2-1:1.0/ttyUSB0/tty/ttyUSB0/dev
/sys/bus/usb/devices/usb2/2-1/dev
/sys/bus/usb/devices/usb2/2-1/2-1:1.3/host0/target0:0:0/0:0:0:0/bsg/0:0:0:0/dev
/sys/bus/usb/devices/usb2/2-1/2-1:1.1/ttyUSB1/tty/ttyUSB1/dev
/sys/bus/usb/devices/usb2/dev
/sys/bus/usb/devices/usb3/dev

 

tf@red-brick:~$ lsusb -v

Bus 002 Device 003: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x12d1 Huawei Technologies Co., Ltd.
  idProduct          0x1001 E169/E620/E800 HSDPA Modem
  bcdDevice            0.00
  iManufacturer           1
  iProduct                2
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          108
    bNumInterfaces          4
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
[..]

Share this post


Link to post
Share on other sites

Modem wird jetzt erkannt. Warum auch immer...

Nächstes Problem: "ERROR: Failed to send SMS"

Habe die Nummer in verschiedenen Formaten eingegeben: mit + / ++ / +49 / 01...

immer keine SMS.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...