Pat28

Ok, it is working now with trixie on raspberry 2B

Thanks

Patrick

Hi, 

I downloaded your link to libgpiod2 1.6.3 and run sudo dpkg -i libgpiod2_1.6.3-1+rpi1+b2_armhf.deb without success:

pi@pi22:~/tinkerforge $ sudo dpkg -i libgpiod2_1.6.3-1+rpi1+b2_armhf.deb
Selecting previously unselected package libgpiod2:armhf.
(Reading database ... 119824 files and directories currently installed.)
Preparing to unpack libgpiod2_1.6.3-1+rpi1+b2_armhf.deb ...
Unpacking libgpiod2:armhf (1.6.3-1+rpi1+b2) ...
dpkg: dependency problems prevent configuration of libgpiod2:armhf:
 libgpiod2:armhf depends on libc6 (>= 2.33).
 libgpiod2:armhf depends on libgcc-s1 (>= 3.5).
 libgpiod2:armhf depends on libstdc++6 (>= 5.2).
 libgpiod3:arm64 (2.2.1-2) breaks libgpiod2 (<< 2.2.1-2) and is installed.
  Version of libgpiod2:armhf to be configured is 1.6.3-1+rpi1+b2.

dpkg: error processing package libgpiod2:armhf (--install):
 dependency problems - leaving unconfigured
Processing triggers for libc-bin (2.41-12+rpt1) ...
Errors were encountered while processing:
 libgpiod2:armhf

 

run sudo apt install -f

pi@pi22:~/tinkerforge $ sudo apt install -f
Correcting dependencies... Done
Installing dependencies:
  gcc-14-base:armhf  libc6:armhf  libgcc-s1:armhf  libidn2-0:armhf  libunistring5:armhf

Suggested packages:
  glibc-doc:armhf  locales:armhf  libnss-nis:armhf  libnss-nisplus:armhf

REMOVING:
  libgpiod2:armhf

Summary:
  Upgrading: 0, Installing: 5, Removing: 1, Not Upgrading: 2
  1 not fully installed or removed.
  Download size: 5,490 kB
  Space needed: 26.0 MB / 6,576 MB available

Continue? [Y/n] y
Get:1 http://deb.debian.org/debian trixie/main armhf gcc-14-base armhf 14.2.0-19 [49.4 kB]
Get:2 http://deb.debian.org/debian trixie/main armhf libgcc-s1 armhf 14.2.0-19 [37.0 kB]
Get:3 http://deb.debian.org/debian trixie/main armhf libunistring5 armhf 1.3-2 [441 kB]
Get:4 http://deb.debian.org/debian trixie/main armhf libidn2-0 armhf 2.3.8-2 [105 kB]
Get:5 http://archive.raspberrypi.com/debian trixie/main armhf libc6 armhf 2.41-12+rpt1 [4,857 kB]
Fetched 5,490 kB in 2s (3,430 kB/s)
Preconfiguring packages ...
(Reading database ... 119833 files and directories currently in  .........

.......select and unpacked a lot of files. 

No error at the end

Then install brickd

pi@pi22:~/tinkerforge $ sudo apt install brickd
Solving dependencies... Error!
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

Unsatisfied dependencies:
 brickd : Depends: libgpiod2 (>= 1.2) but it is not installable
Error: Unable to correct problems, you have held broken packages.
Error: The following information from --solver 3.0 may provide additional context:
   Unable to satisfy dependencies. Reached two conflicting decisions:
   1. brickd:arm64=2.4.7 is selected for install
   2. brickd:arm64 Depends libgpiod2 (>= 1.2)
      but none of the choices are installable:
      [no choices]

And it is not working.

 Any other idea?

Patrick

Hi ,

I put the latest trixie image with desktop on a raspberry pi 4.

When i try to install brickd ,after made the latest update and upgrades, 

with sudo apt install brickd

i receive an error with libgpiod  version 2 not supported in trixie. 

and i cannot install brickd with libgpiod 3version 3.

Can you tell ne if there is a fix/work around to install brickd on trixie  rasbian.

Thanks

Patrick

Hi Borg and Rtrbt,

Enabling SPI and  editing of the  /etc/brickd.conf file did the job.

But the mqtt code for the motion detection only seems to work once with this result:

For the NFC: nothing in the mqtt explorer.

I think i will stop trying to use tinkerforge mqtt to get the data to openhab.

To complicated.

Tinkerforge was a good hardware, easy to use with openhab 2 binding for non pro's of coding.

A pity it is not working with openhab 3 anymore.

You are losing potential users.....

Thanks for the help.

Patrick

 

Hi,

Sorry i did not reply to your last mail, but my HAT Zero is not detected anymore (is less than 2 years old).

I could not test your MQTT code.

I see the blue leds of the HAT zero and the bricklet, but no data.

Found a post ( HAT Zero and Thermal sensor are not responding ) and tried the tests.

Attached the brikd.log file from /var/log/brickd.log

brickd.log

Then did

sudo systemctl stop brickd

and then start a non-daemonized instance with debug logging:

sudo brickd --debug -all,+bricklet.c

and got this result:

pi@raspberrypi:~ $ sudo brickd --debug -all,+bricklet.c
2022-08-19 09:09:51.123255 <I> <main_linux.c:367> Brick Daemon 2.4.3 started (pid: 1220, daemonized: 0)
2022-08-19 09:09:51.138444 <D> <bricklet.c:237> No HAT product_id file in device tree, not using default HAT Brick config
2022-08-19 09:09:51.139510 <D> <bricklet.c:237> No HAT product_id file in device tree, not using default HAT Zero Brick config
2022-08-19 09:09:51.140378 <D> <bricklet.c:424> Found no supported HAT product_id in device tree, checking bricklet.* section in config file instead
2022-08-19 09:09:51.141187 <D> <bricklet.c:505> Found no bricklet.* section in config file

That seems not very good.

Then i send this command: brickd --check-config and got this results:

 

I then formatted the SD card and loaded the latest PI image on the PI ZERO and nothing else than the brickd and brickv software.

No luck, still not HAT detection in brickv.

Tested on a pi4 , same result.

Any chances to get the HAT Zero back to life?

Thanks

Patrick

 

Hi,

I tried the NFC and motion bricklet , without success. 

I am not a programmer and try to learn by example with the help of documentation.

I was using the tinkerforge binding in OH 2 without any "coding", just configuration the things and items.

Very easy to use for a not pro.

But tinkerforge did not make the OH3 binding and told to use MQTT.

I try to do/learn this, but it is more difficult than configuring a OH binding.

Did not fully understand your previous post and the documentation is not very explaining.

After some trail and error i tried this:

   "tinkerforge/request/nfc_bricklet/Y2U/set_mode": {"mode": "simple"},
    "tinkerforge/request/nfc_bricklet/Y2U/simple_get_tag_id": {"index": 0, "tag_type": 2, "tag_id": 0, "last_seen": 0},
    
    "tinkerforge/register/motion_detector_v2_bricklet/MPc/motion_detected": {"register": true}

But did only got errors or null values.

Now i have bricks and bricklets i cannot use....

On every bricklet MQTT you have an example at the top off the document, but never in the api section. 

I would be easier for the non-pro's like me to have some results.

Thanks

Patrick

 

 

Hi,

That is exactly what i did for the ambiant light bricklet:

"tinkerforge/register/ambient_light_v3_bricklet/L2H/illuminance/get_illuminance": {"register": true},
 "tinkerforge/request/ambient_light_v3_bricklet/L2H/set_illuminance_callback_configuration": {"period": 1000, "value_has_to_change": false, "option": "off", "min": 0, "max": 0},

with success.

 

But the motion detection and nfc bricklets are not working. No data is shown in the mqtt explorer.

Here is what it tried without success with the info i found in the docs:

    "tinkerforge/register/nfc_bricklet/Y2U/reader_get_tag_id": {"register": true},
    "tinkerforge/request/nfc_bricklet/Y2U/reader_state_changed": {"period": 2000},

    "tinkerforge/register/motion_detector_v2_bricklet/MPc/get_motion_detected": {"register": true},
    "tinkerforge/request/motion_detector_v2_bricklet/MPc/motion_detected": {"period": 2000}

Could you send me a working code for those two not working bricklets?

Thanks

Patrick

Hi,

Made some progress.

change tf_mqtt.txt file to:

{
    "tinkerforge/register/air_quality_bricklet/X3s/all_values": {"register": true},
    "tinkerforge/request/air_quality_bricklet/X3s/set_all_values_callback_configuration": {"period": 5000, "value_has_to_change": false},

    "tinkerforge/register/air_quality_bricklet/X3s/iaq_index": {"register": true},
    "tinkerforge/request/air_quality_bricklet/X3s/set_iaq_index_callback_configuration": {"period": 5000, "value_has_to_change": false, "option": "off", "min": 0, "max": 0},

    "tinkerforge/register/air_quality_bricklet/X3s/temperature": {"register": true},
    "tinkerforge/request/air_quality_bricklet/X3s/set_temperature_callback_configuration": {"period": 5000, "value_has_to_change": false, "option": "off", "min": 0, "max": 0},
 
     "tinkerforge/register/air_quality_bricklet/X3s/humidity": {"register": true},
    "tinkerforge/request/air_quality_bricklet/X3s/set_humidity_callback_configuration": {"period": 5000, "value_has_to_change": false, "option": "off", "min": 0, "max": 0},
 
     "tinkerforge/register/air_quality_bricklet/X3s/air_pressure": {"register": true},
    "tinkerforge/request/air_quality_bricklet/X3s/set_air_pressure_callback_configuration": {"period": 5000, "value_has_to_change": false, "option": "off", "min": 0, "max": 0},
}

and see the individual values in MQTT explorer:

 

In Openhab 3.3.0 made a mqtt generic binding with this code:

UID: mqtt:topic:651a155cc0:b06c533a7f
label: MQTT PI21 Generic Thing
thingTypeUID: mqtt:topic
configuration: {}
bridgeUID: mqtt:broker:651a155cc0
channels:
   - id: PI21_IAQ_Index
    channelTypeUID: mqtt:string
    label: MQTT PI21 IAQ index
    description: ""
    configuration:
      stateTopic: tinkerforge/callback/air_quality_bricklet/X3s/iaq_index
  - id: PI21temperature
    channelTypeUID: mqtt:string
    label: MQTT PI21 temperature
    description: ""
    configuration:
      stateTopic: tinkerforge/callback/air_quality_bricklet/X3s/temperature
      unit: '"°C"'
  - id: PI21Allvlues
    channelTypeUID: mqtt:string
    label: MQTT PI21 All values
    description: null
    configuration:
      stateTopic: tinkerforge/callback/air_quality_bricklet/X3s/all_values
  - id: MQTTPI21humidity
    channelTypeUID: mqtt:string
    label: MQTT PI21 Humidity
    description: ""
    configuration:
      stateTopic: tinkerforge/callback/air_quality_bricklet/X3s/humidity
  - id: MQTTPI21Air_pressure
    channelTypeUID: mqtt:string
    label: MQTT PI21 Air Pressure
    description: ""
    configuration:
      stateTopic: tinkerforge/callback/air_quality_bricklet/X3s/air_pressure

The error i made before is that i used a number type instead of a string (see channelTypeUID: mqtt:string

I checked the "default" profile instead of the JSONPATH profile when linking the new item.

And i can see the temperature value in a string format/

Add the channels for  IAQ_index, humidity and air-pressure in the same way and it works fine.

I have other bricklets (motion detection, nfc and ambiant light) to try to get the mqtt values.

From the mqtt examples in the TF documentation, i see that not every bricklet has the same register and request as the air quality bricklet i use in my tf_mqtt.txt file to get the data. How do for example you can get the motion detection and nfc bricklet mqtt data in a mqtt.txt file?

Now find out how the convert the string data into a number in openhab. Will search the openhab forum.

Thanks for the help.

Patrick

Hi Rtrbt,

Thanks for the link.

But there is not much info how to do this json transformation.

Googled a lot, but did not find the solution. Here is what i tried without success?

I saw in the MQTT explorer is in the PUBLISH frame a line called TOPIC:

with tinkerforge/callback/air_quality_bricklet/X3s/all_values in it.

I suppose i have to fill this in the Openhab MQTT binding channel:

In the item configuration i saw a JSONPath  in profile profile:

I tried to put $.device.status.temperature as in the example on the required example line(and many other expressions i found on google) but no success to get the temperature value( is always NULL !!!)

Could you please send me, in detail, how to get the, for example the temperature, as above example, value  in the OH3 item.

I am stuck getting the data in my OH3.

A step by step example would help me to fix/learn how to do it.

Thanks in advance,

Patrick

 

 

Hi Rtrbt,

How do you do this Jason transformation or other operation?

Where can i found the doc or can you send me a detailed how to do this.

Or is their a easier way to get the topic data from the bricklets to import in Openhab 3?

I am missing the tinkerforge binding we had for version 2.5 and lost for 3.3.

It was so easy to get the data.

Thanks

Patrick

Thanks very much rtrbt,

I used your code, run the command and using mqtt explorer i can see the air quality values:

But i have a new problem.

What are the topic names of the air quality bricklet?

I tried to load the iaq_index, iaq_index_accuracy, temperature, humidity and air_pressure as topic into openhab3 and i only see a value= null, not the 60, low, 2598, 5071 and 100674 that i see in the value frame of the mqtt explorer.

Also if you have two or more air quality bricklets on the same broker, can you give every value a specific topic name so you know from witch bricklet for instance the temperature or humidity is coming from ?

Again thanks for help me,

Patrick

 

 

Hi Everyone.

I am new to TF MQTT binding and i have got some problems.

Her is what i did:

My hardware setup:

·         * Raspberry pi 2B with Buster os with latest updates and upgrades

·         * Network connection with fixed IP 192.168.10.21 from PI to switch

·       *   Tinkerforge master brick with USB cable to PI and my air quality bricklet connected

·         * Synology DSM7.1 (IP 192.168.10.5) with mosquitto package installed used as MQTT broker and Openhab 3.3 software

 

Install brick viewer on pi :

sudo apt install brickv

See bricklet UID via brickv software on PI: can see that it is working without problems

 

Install mqtt api binding on raspberry pi:

sudo apt install tinkerforge-mqtt

 

Copy the tinkerforge-mqtt fle to the /usr/local/bin folder on pi

Create a init-file in the same /usr/local/bin folder to put the mqtt commands

For example tf_mqtt.txt file with MQTT commands for air quality bricklet found in the Tinkerforge MQTT documentation examples webpage:

https://www.tinkerforge.com/en/doc/Software/Bricklets/AirQuality_Bricklet_MQTT.html#air-quality-bricklet-mqtt-examples

My content tf_mqtt.txt file:

subscribe to tinkerforge/callback/air_quality_bricklet/XYZ/all_values

publish '{"register": true}' to tinkerforge/register/air_quality_bricklet/XYZ/all_values

publish '{"period": 1000, "value_has_to_change": false}' to tinkerforge/request/air_quality_bricklet/X3s/set_all_values_callback_configuration

replace XYZ with your air quality bricklet UID value from the brick viewer.

 

In Pi terminal run :

python3 /usr/local/bin/tinkerforge_mqtt --broker-host 192.168.10.5 --init-file /usr/local/bin/tf_mqtt.txt

Where the broker host is the IP of my Synology MQTT broker on same network.

and i receive this error message:

pi@raspberrypi:~ $ python3 /usr/local/bin/tinkerforge_mqtt --broker-host 192.168.10.5 --init-file /usr/local/bin/tf_mqtt.txt
Could not read init file: Expecting value: line 1 column 1 (char 0)

what did i do wrong/forgot.

Thanks for helping me out.

Patrick

 

 

Hi Rtrbt,

I hope you have finished your work with the charging stations.

Do you now have some time to make the new Openhab 3 Tinkerforge binding?

Any idea of the ETA?

Thanks

Patrick

Hi rtrbt

Did you finish your charging station software?

Any chance to have the new Openhab 3.1.0 binding soon? ETA ?

Thanks

Patrick

Hi rtrbt,

Any chances to squeeze the new Tinkerforge Openhab 3.0 binding  between your other todo list?

Thank you.

Patrick

Hi everyone,

Now that OH3 is out, i do not find the Tinkerforge binding.

It was working with the 2.5 version without any problems.

Any idea when the OH3 Tinkerforge binding will be available?

Thanks

Hi rwblinn,

 

Thanks for the instructions steps.

It works fine thanks to you.

 

I modified the last line:

python brick-mqtt-proxy.py --brickd-host 192.168.1.xxx --brickd-port 4223 --broker-host localhost --broker-port 1883 --update-interval 5& 

 

where xxx = ip address tinkerforge brick

and interval 5 to have a 5 seconds refresh.

 

Again , thanks for helping me solve this problem.

 

Patrick

Hi,

On a raspberry pi with Jessie image (latest update and upgrades), python 2.7.9

 

installed brick MQTT proxy:

wget https://raw.githubusercontent.com/Tinkerforge/brick-mqtt-proxy/master/brick-mqtt-proxy.py

 

installed brick deamon:

sudo apt-get install libusb-1.0-0 libudev0 pm-utils

  wget http://download.tinkerforge.com/tools/brickd/linux/brickd_linux_latest_armhf.deb

  sudo dpkg -i brickd_linux_latest_armhf.deb

 

Brick deamon is working fine; I can see the values of the bricklets

 

Installed the Python API bindings:

sudo pip install tinkerforge

 

Installed  Eclipse Paho MQTT Python client library:

sudo pip install paho-mqtt     

 

Started the proxy with:

sudo python brick-mqtt-proxy.py

 

And receive this error:

 

pi@PI1:~ $ sudo python brick-mqtt-proxy.py

Traceback (most recent call last):

  File "brick-mqtt-proxy.py", line 1233, in <module>

    proxy.connect()

  File "brick-mqtt-proxy.py", line 1100, in connect

    self.client.connect(self.broker_host, self.broker_port)

  File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py", line 686, in connect

    return self.reconnect()

  File "/usr/local/lib/python2.7/dist-packages/paho/mqtt/client.py", line 808, in reconnect

    sock = socket.create_connection((self._host, self._port), source_address=(self._bind_address, 0))

  File "/usr/lib/python2.7/socket.py", line 571, in create_connection

    raise err

socket.error: [Errno 111] Connection refused

 

What did I do wrong?

 

Thanks

Patrick