Siddhant

So you mean after configuring the RS485 extensions indicidually using a Master Brick, i can later stack all the configured RS485 bricks on top of 1 Master brick? Should that work? Like in the following example i mentioned above? IMU Stack 1 Single Receiver Stack (Master + IMU + RS485) <---------->RS485(1) IMU Stack 2 (Master + IMU + RS485) <---------->RS485(2) IMU Stack 3 (Master + IMU + RS485) <---------->RS485(3) IMU Stack 4 (Master + IMU + RS485) <---------->RS485(4) IMU Stack 5 (Master + IMU + RS485) <---------->RS485(5) IMU Stack 6 (Master + IMU + RS485) <---------->RS485(6) Master<------------USB------------>PC

Sorry I didnt get this :( Could you please explain it maybe with an illustration as you did before? Thanks!

Also I am looking to integrate a total of 6 IMU stacks in the project that will send gyroscope data to a PC from 6 different arms. I will use Labview to read this data. Does this mean i will need 6 Sets of IMU Stacks and Receiver Stacks: IMU Stack 1..6 Receiver Stack 1..6 RS485<---------------->RS485 IMU Master<---------------------->PC Master Or can I do it like this (Using multiple IMU Stacks (IMU+Master+RS485) on the input side connected to one Receiver RS485 Extension for each and one Master for all the receiving RS485 stacks): IMU Stack 1 Receiver Stack 1 RS485 <---------->RS485(1) IMU Master IMU Stack 2 <---------->RS485(2) IMU Stack 3 <---------->RS485(3) IMU Stack 4 <---------->RS485(4) IMU Stack 5 <---------->RS485(5) IMU Stack 6 <---------->RS485(6) Master<--------------------->PC If i can do this, any tips on how to configure each receiver RS485 using the Receiver Master?

Hi, thanks that helps a lot! :) Once the communication is configured this should enable transmission over longer distances using RS485 cables, right?

Hi, I was wondering how the 2 components work together exactly. Can i directly mount the RS485 master extension on the IMU Brick using the stack connector and then use the RS485 to get the output signals? Or do i need another Master brick in between? Requirement is to send the IMU Gyroscope signals/values over a distance of more than 10 meters atleast and could go upto 20 meters. Any help is appreciated. IMU Brick: https://www.tinkerforge.com/en/doc/Hardware/Bricks/IMU_V2_Brick.html RS485 Master Extension: https://www.tinkerforge.com/en/doc/Hardware/Master_Extensions/RS485_Extension.html#rs485-extension Thanks, Siddhant