Geschrieben October 7, 2018 at 13:227. Okt 2018 Was trage ich nun bei den Arguments ein? /dev/ttyUSB1 Habe "alles" ausprobiert: /dev/ttyUSB0, /dev/ttyUSB1, /dev/ttyUSB2, /dev/ttyUSB3. Immer der selbe Fehler. Modem wird aber mit lsusb -v erkannt. tf@red-brick:~$ find /sys/bus/usb/devices/usb*/ -name dev /sys/bus/usb/devices/usb1/dev /sys/bus/usb/devices/usb2/2-1/2-1:1.2/ttyUSB2/tty/ttyUSB2/dev /sys/bus/usb/devices/usb2/2-1/2-1:1.0/ttyUSB0/tty/ttyUSB0/dev /sys/bus/usb/devices/usb2/2-1/dev /sys/bus/usb/devices/usb2/2-1/2-1:1.3/host0/target0:0:0/0:0:0:0/bsg/0:0:0:0/dev /sys/bus/usb/devices/usb2/2-1/2-1:1.1/ttyUSB1/tty/ttyUSB1/dev /sys/bus/usb/devices/usb2/dev /sys/bus/usb/devices/usb3/dev tf@red-brick:~$ lsusb -v Bus 002 Device 003: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x12d1 Huawei Technologies Co., Ltd. idProduct 0x1001 E169/E620/E800 HSDPA Modem bcdDevice 0.00 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 108 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None [..]
Geschrieben October 7, 2018 at 16:407. Okt 2018 Autor Modem wird jetzt erkannt. Warum auch immer... Nächstes Problem: "ERROR: Failed to send SMS" Habe die Nummer in verschiedenen Formaten eingegeben: mit + / ++ / +49 / 01... immer keine SMS.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.