neomutant

The base is this Heli Trex 700e v2 (just the version flybarless v2 and not flybar like in the movie) this heli is great for 3D acrobatic and it's lifting capabilities is outstanding.

Just like in subject.

It will be a big RC Helicopter Drone for filming from the air. Autonomous, but controlled from the ground. Will fly along the designated 3D points (sent from the computer during the flight or manually marked during the flight manual). Similarly gimbal control (Camera control and stabilization system) that will switch between modes (GpsTracking point3D tracking, HeadTraking with video feed, manual / stick). It will operate under local control (on helicopter, with the help of sensors) system preventing collisions in the case when the flight route will be on a collision course.

GPS precision and speed will be increased using an accelerometer, and a mini camera horizontally stabilized always directed vertically downward.

Wanted to know is it in between (outdoor, small antennas):

- (10-20m);

- (20-50m);

- (50-150m);

- or to 500m

so i have to test it out.

Im planing to use it on RC helicopter with very expensive payload. I have to know how much I can fly away. I will have fail-safes for return home in case of loosing signal. For sure I will test it on the ground fist, and share with test results.

Hi

Just like in subject.

Kris.

Industrial Quad Relay with other tings are ordered. Thx for help. Now Im waiting for GPS bricket and sonic range bricket to complete my other project. I hope they get in shop soon and the Gps Bricket will be fast and precise as hell 

Hi

Im planing to create strobe controller with music control, low frequency will trigger one relay and high another one. I will use LiPo 6s 5000mah (22.2v) battery for the led's.

How fast the Dual Relay bricket can swich on/off ?

Kris.

The original Ida (with The Brick that would control the other Bricks) was to overcome read out rates from Bricks faster then USB (More then 1000  times per second) to gain more precise data to work with. 

As U say it will be possible in Future (as discussed in your 2, 3 options in reply).

Come to think about it, you're absolutely right (Why create something, what is already exsist, and waste some time to write compiler)

Personally, I use the EPIA-P910 / or similar ( quad Core Pico-ITX) need to process in real time video and PointCloud from Xbox Kinect device in the air.

(www.viaembedded.com/en/products/boards/1950/1/EPIA-P910.html) Small Linux board will be not powerful enough for my project.

Another idea to control Bicks and Brickets.

It would be a great help for those who are not familiar with electronics. But the programing is their second life.

The idea is to create a Brick (would be combined with other Bricks and Brickets on stack).

which controls the other with a code that was compiled before on the computer and uploaded to it by BrickViewer or a special code editor.

Would have to be created a special code editor that the syntax was like that other high-level languages ​​such as Delphi / CPP.

I imagine it as a main program with subroutines that would be fired by brickests connected to it (like rotarybricket or some buttons)

I Can offer assistance in creating / fine tuning code editor for receiving simplified syntax delphi and compile it into a universal code understandable for this brick .. (so everyone could use the syntax in a high level language that likes. formed over time by the possibility of using other programming languages)

I think it would be very useful to create unlimited distance MasterExtesion which offers internet via sim card service. It could be useful for example for drone controll.

UAV (Unmanned aerial vehicle) / Drone with small PicoITX with pc and BRICS got to commands, and send telemery to ground unit.

Hi, U need Servo brick its very easy to use.

I hope (I think we all do), that GPS unit will  be very very fast (15-30 Hz) and accurate as possible (10-15cm) 

I wish we could buy from thinkerforge "PPM Encoder"

https://store.diydrones.com/product_p/br-ppme.htm

Best regards Kris.

1) Is it possible to use Barometer Bricklet as Altimeter?

2) How fast and precise will be GPS Bricklet?

thanks, that's what I'll do. When I succeed will share the code with others.It can take a while, because I do not possess the right skills yet.

I wrote a program in delphi that reads analog value from "Analog In Bricklet"

and I came across a limitation that does not allow me to go further.

Restriction applies to the minimum reading time ~ 1ms is not sufficient. Is it possible somehow get around and read the value as fast as 1/100 ms? or may not be better to use the "Breakout Bricklet" and read faster?