Hello,

I recently bought a master brick, unfortunately when I connect the Brick to the Pc via USB, an error ,relating to the current it needs, comes up. Is there a workaround for this problem.

Edited December 9, 2020 at 11:54 AMDec 9, 2020 by bugra_s

Hello Bugra,

that sounds like there is somewhere a short circuit. Is there something obvious visible at the Master Brick? Can you check the Bricklet connectors for bend pins? (Please see https://www.tinkerforge.com/en/doc/FAQ.html#my-brick-gets-hot).