Hi,

 

I made an application with GAMBAS which can control a meeting room schedule and I wanted to upload it to my HDMI Display (12.7cm) from TinkerForge.

 

I guess we can say that I'm a beginner with TinkerForge and I'm not able to send my application to the screen.

 

My HDMI display is connected to a RED Brick. I can turn on the screen without any problems, I can also access all the RED Brick OS with the SD card. Basically, the screen works perfectly. I tried connecting the RED brick to the Internet but the WiFi Extension is not compatible with the RED Brick.

 

So I wanted to know if there's any way that I can upload my application via USB to the RED brick, or the SD card that's in the RED Brick slot.

 

Let me know if you have anymore questions.

Thanks for your help!

 

You can upload via USB through the program tab in Brick Viewer, see here: http://www.tinkerforge.com/en/doc/Hardware/Bricks/RED_Brick_Program_Tab.html#red-brick-program-tab

 

For WIFI we recommend a USB WIFI Stick, like this one: https://www.tinkerforge.com/en/shop/accessories/red-brick/wifi-usb-adapter.html

Perfect, thanks for your help!